Acoustics Research AWSBT4BK Portable Wireless Speaker Operation Manual

Acoustics Research AWSBT4BK Portable Wireless Speaker 

Introduction

The portable wireless speaker makes it easy to take your music wherever you go and share it whenever you want, with Bluetooth® wireless connectivity and a built-in auxiliary input. It’s compact, easy-to-carry and simple to use. This manual covers various connection options and detailed operating instructions for making the customizable portable wireless speaker a part of your lifestyle. If, after having reviewed the instructions, you have any questions, please call toll-free 1-800-732-6866 or visit www.acoustic-research.com.

Important Information

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Care and Maintenance

• Always use a soft cloth to clean the speaker and transmitter. Never use any product containing alcohol or other solvents as they may damage the surface.
• Use caution when plugging the power transformers in an AC outlet to avoid the risk of electric shock.
• If the speaker are used outside on a deck or patio, make sure you take them indoors in the event of a rainstorm to prevent possible damage.
• Do not operate or store the system in extreme temperatures (below 32ºF/0ºC and above 122ºF/50ºC).

Tour of the Speaker

Back panel

• Power and Pairing indicator shows the status of the speaker.
• The speaker is on but not paired or connected.
• The speaker is in Bluetooth pairing mode. See the Bluetooth Setup section for more information.
• The speaker is paired with a Bluetooth-enabled device or the auxiliary audio input is connected.
• ON/OFF button turns the speaker on and off.
• – VOLUME + buttons adjust the speaker’s volume level.
• Pair button (Press and hold for 3 seconds) puts the speaker in pairing mode for Bluetooth setup (press and hold for 3 seconds). It also performs a fast reconnect with devices that have lost connection (press and release). See the Bluetooth setup section for more information
• AUX IN connects directly to your MP3 player, smartphone, or other portable audio device, using the 3.5mm audio in cable provided.
• DC IN receives the small round end of the included 12V DC 1000mA AC power adapter; remove the protective cover to insert the adapter.

Bottom panel
Battery Compartment Cover remove to install 8 AA batteries.

Powering the Speaker

There are two options to power your wireless speaker: using the included AC power adapter or using 8 AA batteries (not included).

AC Power Adapter

• Insert the small, round plug from the speaker AC power adapter into the DC IN jack on the bottom panel of the speaker.
• Plug the other end of the speaker AC power adapter into any standard 120V AC wall outlet.

Notes

• Be sure to use the speaker AC power adapter rated 12V DC 1000 mA.
• The power unit should be plugged in so that it stays vertical or lies flat.

AA Batteries

• Remove the battery compartment cover on the bottom of the speaker.
• Insert eight (8) AA batteries (not included) into the speaker following the polarity (”+” and “-”) as diagrammed inside the battery compartment.
• Replace the battery compartment cover on the bottom of the speaker.

Note

• Place the rubber cap in the speaker power input jack when using batteries.
• DO NOT mix batteries with different chemistry types (for example, a zinc battery with an alkaline battery).
• DO NOT mix new and used batteries. DO NOT leave batteries installed in the product when not in use for long periods.
• Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with local and national regulations.

Setting Up Bluetooth Wireless

Pairing
The Bluetooth-enabled device that you wish to stream audio to your speaker system must fi rst be paired to the speaker. The process is simple, and in most cases the pairing process needs to be done only once.

To pair your Bluetooth-enabled device with the speaker:

• Make sure your device’s Bluetooth is turned on. See the wireless and/or network settings menu on your device to check.
• If the speaker isn’t already on, press the ON/OFF button to turn it on. You will hear the turn on music to indicate the speaker is turned on. The indicator light at the back of the speaker starts flashing blue.
• Open the Bluetooth settings menu on your device. Select “AR AWSBT4” from the list of devices available (you might have to scan for devices). If your device asks for a password, enter “0000”.
• A confirmation screen will appear on your device once the speaker and the device are successfully paired. The blue indicator turns solid blue to indicate successful connection. The speaker is now ready for you to stream audio from your device.
• Turn the volume on your device to at least 3/4 max, then start playing something on the device. Control the speaker volume on the speaker itself, using the Volume +/– buttons at the back of the speaker.

Reconnecting
When you turn it on, the speaker reconnects automatically with the last paired device. When you leave the Bluetooth operating range, with the speaker turned ON, it disconnects. When you come back into the Bluetooth operating range, press the Pair button to reconnect to the last paired device. The successfully paired music will sound once it has been successfully connected.

Setting Up Bluetooth Wireless

Streaming Audio With Bluetooth
Once you’ve paired and connected your device with the speaker, you can control music playback from the palm of your hand. Select your music, stop it, change songs and playlists, all right from your device’s screen.

• To adjust volume: Press the – VOLUME + buttons at the back of the speaker.
• To disconnect from the speaker: Either turn Bluetooth off on your device or choose
• “Disconnect” from the list of options in your device’s Bluetooth settings.

To reconnect with the speaker: Just turn the speaker on and wait a few seconds for the speaker to fi nd and connect to your device. If the speaker still hasn’t found your device (which may happen if, for instance, another device has been connected after yours) make sure the speaker isn’t connected to another device currently. Then select the “AR AWSBT4” from the list of Bluetooth connections available in your device’s Bluetooth menu to connect to it.

Using the Auxiliary Audio Input

Making a Direct Connection

• If the speaker isn’t already on, press the ON/OFF button to turn it on.
• Connect one end of the provided 3.5mm audio in cable to the AUX IN jack on the back of the speaker.
• Connect the other end of the cable to the headphone output on your MP3 player or other portable audio device.

Warning: This product is designed to work with line level outputs or headphone outputs only. DO NOT connect it directly to speaker outputs as it will permanently damage the speaker.

Turning the Speaker Off

• Press the ON/OFF button at the back of the speaker to turn the speaker off.
• Confirm that the speaker is off by verifying that the indicator light at the back of the speaker is no longer illuminated.

Troubleshooting

The following troubleshooting guide takes you through some of the more common problems associated with the installation and/or operation of a wireless system. If the problem persists, please call toll-free at 1-800-732-6866 or visit www.acoustic-research.com

Specifications

Speaker

• Bluetooth® wireless technology: Bluetooth v4.0
• Profile: A2DP audio sink, AVRCP
• Class 2 Radio
• 2-way acoustic design:
• 3” Driver, 1.5” tweeter
• Passive Radiator: 4” round
• Audio line-in
• Operation distance : Up to 33 Feet (open area)*
• Frequency response: 20Hz – 20kHz
• Operates using supplied AC adapter or eight (8) AA batteries (not included)

RF Exposure Warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Industry Canada Regulatory Information
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:

• this device may not cause interference and
• this device must accept any interference, including interference that may cause undesired operation of the device.

Industry Canada Regulatory Information

• CAN ICES-3 (B)/NMB-3 (B)
• CAN ICES-3 (B)/NMB-3 (B)

IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by VOXX Accessories Corporation is under license. Other trademarks and trade names are those of their respective owners.

Warranty

12 Month Limited Warranty

• VOXX Accessories Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor.
• To obtain repair or replacement within the terms of this Warranty, the product along with any accessories included in the original packaging is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below.
• Do not return this product to the Retailer.
• This Warranty is not transferable and does not cover product purchased, serviced or used outside the United States or Canada. The warranty does not extend to the elimination of externally generated static or noise, to costs incurred for the installation, removal or reinstallation of the product.
• The warranty does not apply to any product or part thereof which, in the opinion of the company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident or exposure to moisture.
• This warranty does not apply to damage caused by an AC adapter not provided with the product, or by leaving non-rechargeable batteries in the product while plugged into an AC outlet.

THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities.

ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.

• Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you.
• This Warranty gives you specific legal rights and you may also have other rights which vary from state/province to state/province.

U.S.A.:Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit #3 Door 14, Mississauga Ontario L5T 3A5

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to operate it.

PDF

Acoustics Research AWSBT4BK Portable Wireless Speaker operation manual

FAQs