Black & Decker MTS12 Multi Purpose Tool Instruction Manual

Black & Decker MTS12 Multi Purpose Tool

Introduction

A multipurpose and small power tool, the Black & Decker MTS12 Multi-Purpose Tool is made for a variety of cutting, sanding, scraping, and grinding jobs. This tool’s oscillating mechanism and detachable parts make it ideal for both professionals and do-it-yourselfers. The MTS12 is perfect for detailed work in confined areas because it is lightweight and simple to operate. This versatile tool offers accuracy and effectiveness whether you’re sanding surfaces, removing grout, or trimming wood.

Specification

• 12V (rechargeable battery-powered, cordless).
• Up to 16,000 oscillations per minute (OPM) are possible.
• Lithium-ion battery type (included).
• Three to five hours is the estimated charging time.
• Designed to be lightweight for effortless handling.
• Contains several scraping, sanding, and cutting attachments.

Intended use

Your Black & Decker multi-purpose tool has been designed for a wide range of DIY applications. Using the shear head (MTS12), this tool is intended for cutting thin, flexible materials, such as carpet (up to 6.5mm), vinyl, metal (up to 0.5 mm) and wire mesh (up to 0.5 mm). This tool is intended for consumer use only.

Features

• Cutting, sanding, and scraping may be done precisely and effectively with oscillating technology.
• Contains several attachments for different purposes.
• Modifiable speed settings to improve accuracy and control.
• Simple to manage and move around in confined areas.
• For portability, it is powered by a 12V lithium-ion battery.
• Changing an attachment quickly and easily without the need for extra tools.
• Works well with grout, metal, plastic, and wood.
• Enhances visibility by illuminating your workspace.
• Handling comfortably for prolonged use.
• Made to survive challenging circumstances on the job site.

Safety instructions

General power tool safety warnings

• Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury.
• Read all safety warnings and all instructions provided with your power tool (MT143, MT350, MT108 or MT18) before using this accessory. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

Warning! Additional safety warnings for shears and nibblers

• Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock
• Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
• Keep hands away from cutting area. Never reach underneath the work piece for any reason. Do not insert fingers or thumb into the vicinity of the blade. Do not stabilize the shear by gripping underneath.
• Keep blades sharp. Dull or damaged blades may cause the saw to swerve or stall under pressure. Always use the appropriate type of saw blade for the workpiece material and type of cut
• Do not touch the workpiece or the blade immediately after operating the tool. They can become very hot.
• The blade will continue to move after releasing the switch. Always switch the tool off and wait for the saw blade to come to a complete standstill before putting the tool down.

Warning! Contact with, or inhalation of dusts arising from cutting applications may endanger the health of the operator and possible bystanders. Wear a dust mask specifically designed for protection against dust and fumes and ensure that persons within or entering the work area are also protected.

• The intended use is described in this instruction manual. The use of any accessory or attachment or performance of any operation with this tool other than those recommended in this instruction manual may present a risk of personal injury and/or damage to property.

Features

Tool shown is MT218. Other tools are available for use with this tool head. This tool includes some or all of the following features.

• Shear head
• Upper blade
• Lower blade

Use

Warning! Let the tool work at its own pace. Do not overload.

Switching on and off
Note: Ensure the forward reverse slider (2) is not in the locked position.

• To switch the tool on, press the variable speed switch (1). The tool speed depends on how far you press the switch.
• To switch the tool off, release the variable speed switch.

Materials that can be cut

• Carpet up to 6.35mm thick.
• Fabric.
• Vinyl (flexible plastic) up to 3.175mm thick.
• Metal 26 GA (0.5mm) or thinner.
• Wire mesh 0.5mm or thinner.

Note: Do not use this tool for pocket cutting.

Cutting metal  

• Only thin guage metals (26 GA or thinner) are to be cut.
• Avoid forcing cutting blade as this reduces blade life and causes costly blade damage.
• Use your free hand to roll material to be dicarded out of the way as cutting progresses

Warning! Sheet metal edges can be razor sharp and extreme caution must be used when working with this material. Always wear gloves while working with sheet metal.

Hints for optimum use

• Lightly place blade against work to be cut.
• Always hold cutter firmly while cutting.
• Before cutting any type of material, be sure it is firmly anchored or clamped to prevent slipping.
• Cut only with sharp blades; they cut cleaner, faster and put less strain on the motor while cutting
• When cutting materials with adhesive backing (vinyl floor tile, etc.) periodically clean blades; adhesive residue will build up on blades reducing the quality of cut and strain the motor.
• When cutting carpet or other fibrous materials periodically clean fibers out from in between the blades; built up fibers will reduce the shearing action thereby reducing the quality of cut and strain the motor When cutting stiffer materials such as sheet metal, vinyl, etc, use free hand to either work material up over the unit or roll material to be discarded out of the way as cutting progresses.
• When cutting curves, do not tilt the tool; keep the blades perpendicular to the work piece.
• Advance blades into the material without forced effort or unnecessary pressure. A little practice will enable you to determine what forward pressure gives you the smoothest cutting.

Accessories

The performance of your tool depends on the accessory used. Black & Decker and Piranha accessories are engineered to high quality standards and designed to enhance the performance of your tool. By using these accessories you will get the very best from your tool.

Technical data

Guarantee

Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area. If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless: u The product has been used for trade, professional or hire purposes; u The product has been subjected to misuse or neglect; u The product has sustained damage through foreign objects, substances or accidents; u Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff.

To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www.blackanddecker.co.uk

EC declaration of conformity
Black & Decker declares that these products described under “technical data” are in compliance with: 2006/42/EC, EN60745-1, EN60745-2-1, EN60745-2-8 These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information, please contact Stanley Europe at the following address or refer to the back of the manual. The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of Black & Decker

PDF

Black & Decker MTS12 Multi Purpose Tool Instruction manual

FAQs