Kogan KAAURASWBTA Aura Smart Watch User Guide

Kogan KAAURASWBTA Aura Smart Watch

Introduction

With its many features, the Kogan KAAURASWBTA Aura Smart Watch is a wearable that keeps you engaged and connected. It is ideal for both regular users and fitness fanatics because it has a 1.4-inch HD touchscreen, SpO2 tracking, 24/7 heart rate monitoring, and several sports modes. The watch has a 7-day battery life, IP68 water resistance, and smart notifications (calls, messages, and applications). It is both fashionable and practical thanks to its streamlined design and interchangeable watch faces.

Specification

• CPU RTL8762D
• ARM Cortex-M0 53MHz
• Memory RAM 128KB + ROM 128Mb
• Touch screen 240×280 big screen, 2.5D glass
• Bluetooth version 5.0
• Battery Lithium-ion 3.7V/260mAh

SAFETY & WARNINGS

• Read the contents of this user guide carefully to ensure that you can use this product correctly and safely.
• Only use the strap provided with this product to prevent affecting the antenna signal of the watch, resulting in unclear calls and inability to locate and other problems.
• The watch should be charging 3 hours at least before use.

Maintenance

• Non-professionals are not allowed to disassemble the watch and other accessories by themselves. When the watch and accessories malfunction, contact help.Kogan.com for support
• Do not use chemical solvents or detergents to clean this product.
• Avoid dropping, knocking or vibrating the watch. Rough handling of the watch will cause the screen to break and damage the internal circuit board and precision structure.
• In case of abnormal phenomena during use, press and hold the power button until the watch is turned on.
• To prolong the service life of the battery, keep the battery fully charged. If the charged battery is left unused for a long time, the battery will gradually discharge by itself. When not in use, place the watch in a cool, dry and dark place after charging.
• When the strap is stained with sweat, dust, etc., wipe it with a clean with a dry soft cloth.
• If the charging contacts are dirty, use a soft dry cloth to clean them and do not scratch them with hard metal objects.
• When the watch strap is old and cracked, it must be replaced with a new one.
• Before cleaning the watch, turn off the watch.
• Do not clean the watch while charging.
• Do not use heat such as a hair dryer to keep the watch dry.
• Do not use mechanical tools such as pressurised air guns and washing machines to clean the watch.

Charging and Battery

• Ensure the contacts are dry and free from dirt before charging.
• Do not throw the watch into fire, nor expose it to direct sunlight, fire or similar excessive heat to avoid battery leakage, overheating, bursting or fire.
• There is a danger of explosion if the battery is incorrectly replaced.
• During charging, the temperature of the battery will rise, do not place the watch together with flammable objects (such as: bedside, clothing, books, so as not to cause a fire.
• The battery of this product is built into the watch. It is strictly forbidden to disassemble, squeeze, heat or burn the battery. It is strictly forbidden to use sharp objects, screwdrivers, etc. to touch or pry the battery. The above operations may cause the battery to catch fire or burn.
• Do not use or store this product in environments with high temperature, high pressure, humidity, strong static electricity and strong magnetic fields.
• It is recommended to charge at a temperature above 5°C and below 35°C to avoid battery performance degradation.
• The battery of this product is built into the watch. It is strictly forbidden to disassemble, squeeze, heat or burn the battery. It is strictly forbidden to use sharp objects, screwdrivers, etc. to touch or pry the battery. The above operations may cause the battery to catch fire or burn.
• Do not use or store this product in environments with high temperature, high pressure, humidity, strong static electricity and strong magnetic fields.
• It is recommended to charge at a temperature above 5°C and below 35°C to avoid battery performance degradation.

Wearing the Watch

• When wearing the watch, adjust the tightness of the strap. It should not be too tight to allow the skin to breathe; it should not be too loose to prevent the watch from falling off or being damaged.
• Avoid wearing the watch in the shower, otherwise the watch may be damaged.
• If the sound becomes weaker after the watch is soaked in water, tap the water out of the speaker and the sound will return to normal.

Skin Allergies

• Some people are susceptible to allergies and may feel uncomfortable when using wearable devices. Pay special attention when wearing a watch.
• If you feel discomfort, it may be caused by wearing it too tight for too long. It is recommended that you adjust the tightness of the strap properly or wear it on the another hand.
• If the skin around or in contact with the watch becomes red, swollen, itchy or has other symptoms of discomfort, stop using it immediately and consult a doctor.
• If you need to replace the watch strap, contact help.Kogan.com for support.
• Discomfort may also be re-induced or increased if continued use after symptoms disappear.

Waterproof Performance

• This watch should not be used for bathing, swimming, diving, water skiing and high-speed water flow or submerged in shallow water.
• Water resistance is not a permanent condition and may decrease over time. To ensure proper use of your watch, follow these tips: Do not wear your watch while swimming, showering, sauna, sweating (or in a steam room) and parking in hot springs, etc.
• Avoid subjecting the watch to sudden temperature changes (such as blowing the watch with hot air from a hair dryer).
• Avoid contact with high-speed running water, such as faucets, rafting, surfing and water skiing.
• Avoid dropping or subjecting the watch to shocks, as the water resistance of the device may be impaired.
• Avoid contact with solvents (white wine, medical alcohol, etc.), acidic substances, detergents, soapy water, perfume, spray insecticide, lotion, sunscreen, oil, hair dye or bubble water, etc.
• Wipe off the product in time when sweat adheres to it for a long time.
• After the watch meets water (such as washing hands). it is necessary to drain the accumulated water in the speaker and microphone holes or use it after drying thoroughly to avoid affecting the sound.

Medical

The measurement results of this product are for reference only and are not intended for any medical use or basis. Always follow the doctor’s instructions

OPERATION

Charging
Align the charging contacts of the watch with metallic contacts on the charging cable until charging power indicator appears on the watch screen. Note: The watch needs to be charged to activate it when it is started for the first time.

Operating the Watch

• Power on: When the watch is powered off, press and hold the function button for 5 seconds to turn it on. The home screen of the watch will be displayed after booting.
• Touch screen operation: From the home screen, swipe to the right to the menu screen, then tap the function icon to enter the corresponding sub-menu.
• Wake up screen: When the watch screen is off, you can press the power button to wake up the screen. If the gesture control is enabled in the APP, you can also wake up the screen by turning your wrist.
• Shutdown: open the setting menu, click System → Shut down, click to shut down.

Removing the Strap
Remove the strap from the watch by sliding the quick release on the strap.

Shortcuts

• Long press the screen to change the home page thumbnail. Swipe left and right to view the different options, then touch the screen to confirm.
• Swipe to the right: Daily activity, Games, Alarms, Sports, etc. Swipe up and down to navigate the list and tap a function to select.
• Swipe down: Battery, Bluetooth, Time and shortcut icons.
• Swipe up: Storage information.
• Swipe to the left: Daily activity, Heart rate, Sleep, Weather (additional functions can be added to this interface).

Settings Menu
You can change the appearance of the Menu. From menu Setting → Choose style → Four icon or List.

Clock Display
When in in clock mode, long press on the screen and select a different clock interfaces.

Screen Lock
In the APP select Personal centre → Device → Screen lock.
You can turn on the Screen lock after setting a password to prevent your children from overusing the watch. If the Screen lock is turned on, a password is required when using the watch.

APP INSTALLATION

Download the Smart-Time Pro App
Download the “Hit Fit Pro” app from the iOS App Store or the Google Play store, or by scanning the QR code below.

Pairing

• Ensure Bluetooth and GPS is enabled on your phone.
• Open “Hit fit Pro” App.
• From the home screen, press Personal centre → Device menu to open the Searching Devices page.
• Press “More” to search for the watch, select Aura Smart Watch to pair the watch as below.

Note: In the “Setting” menu on the watch press System → System version to check the watch Bluetooth name.

• After pairing successfully, the icon will appear in the watch s status bar.

Note: If you want your watch to receive third-party notifications, you need to turn on the notification permissions.

iOS
For iOS systems, when prompted, you will need to agree to pair allow iPhone notifications.

Note: During the pairing process, “Hit fit Pro” will prompt you to enable GPS and Bluetooth and authorise “Hit fit Pro” to get access to the GPS on your mobile phone.

Synchronising Data
Pair your watch with “Hit fit Pro” App, open App, in the home page screen, swipe down to synchronise data. Your data will be shown on App accordingly.

FUNCTIONS

PDF

Kogan KAAURASWBTA Aura Smart Watch User Guide

FAQs