Kogan KASBD60HA 2.0 CHANNEL DOLBY SOUNDBAR User Guide

Kogan KASBD60HA 2.0 CHANNEL DOLBY SOUNDBAR

Introduction

A stylish and potent audio solution, the Kogan KASBD60HA 2.0 Channel Dolby Soundbar is made to improve your TV and entertainment experience. This soundbar offers crystal-clear, immersive sound for movies, music, and games thanks to its Dolby Digital decoding, 60W total output, and numerous networking choices. It provides flexible interoperability with a range of devices thanks to its Bluetooth 5.0, HDMI ARC, optical input, and AUX connectivity. It is ideal for contemporary home setups because to its small, space-saving design, and the wireless remote control guarantees easy control.

Specification

• Audio output
  • 60W RMS
• Speaker drivers
  
  • 15W
• Bluetooth version
  
  • 5.3
• Bluetooth range 
  
  • 10m
• Connection
  
  • USB, OPTICAL, COAXIAL HDMI(ARC), AUX (3.5mm), AC IN
• Power supply
  
  • 100-240V
• Dimensions
  
  • 904 x 108 x 72mm

Instruction

SAFETY & WARNINGS

• Do not use this product in a high temperature or wet environment.
• To reduce the risk or electronic shock or fire, do not remove the cabinet cover.
• Do not attempt to repair or dismantle the unit on your own. Contact help.Kogan.com for support.
• If small fragments or liquids fall into the product, cease use immediately and contact help.Kogan.com for support.
• Don t install the unit in or near a location where it may be exposed to rain, moisture or other liquids.

CONNECTIVITY

• USB IN: Use to connect a flash drive for direct MP3/WAV/FLAC playback (FAT32 format and 64GB max).
• OPTICAL IN: Use to connect compatible devices using an optical cable (not provided).
• HDMI(ARC): Use to connect compatible devices using a HDMI cable (not provided).
• COAXIAL IN: Use to connect compatible devices using a coaxial cable (not provided).
• AUX IN: Use to connect compatible devices using the supplied 3.5mm stereo jack cable.
• AC IN: Use to connect the AC power supply.

LED display

• Red LED: Standby
• BT: Bluetooth mode
• USB: USB media mode
• AUX: Auxiliary input mode
• OPT: Optical mode
• COAX: Coaxial mode
• ARC: HDMI(ARC) mode

REMOTE CONTROL

OPERATION

Wireless subwoofer connection

• Power on both the Soundbar and Subwoofer. The subwoofer’s LED light will be flashing continuously if not connected. Set the soundbar to Bluetooth mode (“BT” will show on the LED display).
• Hold the Play/Pause button for at least 3 seconds, until the display shows “PAIR”. The subwoofer and soundbar will automatically begin pairing. The first connection can take 10 seconds or more.
• When connected successfully, the soundbar will make a chime sound, and the subwoofer’s LED will remain solidly lit.

Input Functions

Power on/off: Press the Power on/off button on the remote control or soundbar control panel to turn the unit on and off.

HDMI (ARC): Connect an HDMI ARC compatible device to the HDMI (ARC) port on the soundbar using an HDMI cable (not supplied). Select HDMI (ARC) mode either by pressing the HDMI (ARC) button on your remote control, or repeatedly pressing the Mode button on the soundbar control panel until “ARC” is displayed on the LED display. Ensure HDMI ARC is selected as the TV’s audio output (check your TV’s settings), then adjust the volume of soundbar using the soundbar’s remote control or control panel.

Auxiliary in: Connect a compatible device using the supplied 3.5mm cable. Select auxiliary mode either by pressing the “AUX” button on your remote control or repeatedly pressing the Mode button on the soundbar control panel until “AUX” is displayed on the LED display.  Ensure the connected device is producing an audio signal, then adjust the volume of soundbar using the volume up and volume down buttons on the remote control or soundbar control panel.

Optical in: Connect a compatible device to the optical input on the soundbar using a digital optical cable (not supplied). Select optical mode either by pressing the “OPT” button on your remote control or repeatedly pressing the Mode button on the soundbar control panel until “OPT” is displayed on the LED display. Ensure Optical SPDIF is selected as the TV’s audio output, then adjust the volume of the soundbar using the volume up and volume down buttons on the remote control or soundbar control panel.

Coaxial in: Connect a compatible device to the coaxial input on the soundbar using a digital coaxial cable (not supplied). Select coaxial mode by repeatedly pressing the Mode button on the soundbar control panel until “COA” is displayed on the LED display. Ensure Coaxial is selected as the TV’s audio output, then adjust the volume of the soundbar using the volume up and volume down buttons on the remote control or soundbar control panel.

Bluetooth

• Press the “BT” button on the remote control or repeatedly pressing the Mode button on the soundbar control panel until BT is shown on the LED display.
• The LED display will flash to indicate that the soundbar is in Bluetooth pairing mode.
• Ensure that the device you wish to connect is also in pairing mode and search for “Kogan 180W Dolby SB” in its device list.
• When the two devices are paired, the LED display on the soundbar will remain solidly lit. The soundbar will now automatically re-pair with this device whenever it is within range and has Bluetooth turned on.

USB media mode

• The soundbar is compatible with USB flash drives of up to 64GB (Fat32 format) in size and can play MP3/WAV/FLAC audio files directly.
• Insert a compatible drive (not supplied) into the USB port on the back of the soundbar and the unit will automatically switch to USB mode and play the first compatible track.
• Press the Repeat Playback button on the remote control to toggle between single track repeat (“ONE”), or all track repeat (“ALL”) to repeat all songs.
• The media player also has a memory function that will recall and continue from the last-played point when a USB flash drive that has previously been used with the soundbar is reinserted.

Equalizer modes
 The soundbar has three equalizer presets, tailored to complement various styles of audio. Press the EQ button on the remote to cycle between Music (“EQ1”), Movie (“EQ2”), and News (“EQ3”) presets.

Wall mounting
The soundbar has two keyhole slots on the back to enable wall mounting using the wall-mounting kit provided.

PDF

Kogan KASBD60HA 2.0 CHANNEL DOLBY SOUNDBAR User Guide

FAQs