Kogan KASHOHT20YA OUTDOOR RADIANT STRIP HEATER User Guide

Kogan KASHOHT20YA OUTDOOR RADIANT STRIP HEATER

Introduction

During cooler months, the stylish and energy-efficient Kogan KASHOHT20YA Outdoor Radiant Strip Heater will keep your outdoor areas toasty and cozy. It is perfect for patios, balconies, cafes, and other outdoor recreational spaces because it uses infrared radiant heating technology to provide immediate, focused warmth to people and objects directly (instead of heating the air). This heater is designed to endure the weather and provide steady, wind-resistant heat thanks to its 2000W capacity, IP65 weatherproof rating, and thermostat control that can be adjusted. The supplied remote control makes operation simple, and the sleek, contemporary style and optional LED lighting add to the ambience.

Specification

• 2400W of power (240V)
• Using an infrared quartz tube for heating
• Up to 10 m²
• Weatherproof IP65 (waterproof and dustproof) rating
• Mounting options include freestanding or wall-mounted (brackets provided).
• It runs on a battery.
• White/Amber brightness adjustment
• Thermostat that can be adjusted (15°C to 40°C)
• 1–12 hours; safety features: child lock, tip-over switch, and overheat protection
• 1200 x 150 x 80 mm (L x W).
• 5.5 kg in weight

Instruction

SAFETY & WARNINGS

Before First Use: Please read and carefully follow all the instructions provided in this document, even if you are familiar with the product. Keep the instructions in a safe place for future reference. Ensure the heater is fully installed before turning it on. Note that during the initial use of the heater, you may detect some smell and smoke, which is normal. This is caused by the burning off of protective oils used during production. Allow the appliance to heat up in a well-ventilated area, and the smell will dissipate over a short period.

Important Safety Notes:

• This heater does not come equipped with a device to control room temperature.
• Warning: To reduce the risk of fire, electrical shock, or injury to persons or property, always follow basic safety precautions when using any electrical product, including the following:
• Install the heater at a safe distance from furniture or other appliances and ensure it is securely affixed to the wall.
• The heater should be installed in a manner that prevents the controls from being touched by a person using a bath or shower.
• Consult a qualified electrician or service technician if the power cord becomes damaged.
• Use only the voltage specified on the heater’s rating plate.
• Do not cover the grilles or obstruct the airflow by placing the appliance against any surface.
• Keep all objects at least 1 meter away from the front, sides, and rear of the heater.
• Do not place the product near a radiant heat source.
• Do not use the heater in areas near where gasoline, paint, or other flammable liquids are used or stored.
• To avoid burns, do not touch any surface of the product when it is hot. Switch off the heater and allow it to cool before moving.
• Do not immerse the heater in liquid or allow water to enter its interior, as this can create an electrical shock hazard.
• Do not touch the appliance with wet hands.
• Do not attempt to repair this product yourself. If the product or its power supply malfunctions or is damaged, discontinue use immediately and contact help.Kogan.com for support.
• The most common cause of overheating is the accumulation of dust or fluff in the heater. Ensure that these deposits are regularly removed by unplugging the heater and vacuum cleaning the air vents and grilles.
• Do not use this product near a window, as rain may cause electric shock.
• Do not use any abrasive cleaning products. Clean with a cloth dampened (not wet) in soapy water.
• Do not use the product near a bath, shower, swimming pool, or other liquids.
• Do not use an extension cord with this product.
• Ensure that the cord does not come into contact with any heated surface during operation.
• Avoid running the power cord in areas where people may trip.
• Do not twist, kink, or warp the cord around the heater, as this may weaken and split the insulation. Always ensure that all cord is completely removed from any cord storage area.
• Do not store the heater while it is still hot.
• Do not use this appliance with any external timer, or any other device that automatically switches on the heater, as this may create a fire risk if the heater is covered or positioned incorrectly.
• The covers of this appliance are intended to protect direct access to the heating elements and must be in place when the appliance is in use.
• Use this product only as described in this user guide.
• This appliance is not intended for use by individuals (including children) with reduced physical, sensory, or mental capabilities or those lacking experience and knowledge, unless they have received supervision or instruction from a responsible person regarding the safe use of the appliance.
• Children should be supervised to ensure they do not play with the appliance.
• This appliance can be used by children aged 8 years and above, as well as individuals with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, provided they have received supervision or instruction on safe usage and understand the associated hazards. Children should not play with the appliance, and cleaning and user maintenance should not be performed by children without supervision.
• Children under the age of 3 should be kept away from the appliance unless continuously supervised. Children aged 3 years and older but younger than 8 years should only operate the appliance by switching it ON/OFF if it has been placed or installed in its intended normal operating position, and they have received supervision or instruction on safe usage and understand the hazards involved. Children aged 3

Disposal

This marking indicates that this appliance should not be disposed with other house-hold wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

COMPONENTS

OVERVIEW

Remote Control

Display

INSTALLATION

• Remove the heater and all accessories from the packing.
• If possible, retain the packaging in case storage or transport is required in future.
• Place the heater with the curved side down on a stable, flat surface.
• Slide the x2 H heater brackets into the rails on the rear of the heater and space them according to your installation requirements (no more than 1000 mm apart).

• Secure each bracket in place using 2 wing screws.

Mounting the Wall Brackets
This heater can be either mounted on a ceiling or on a wall.

Ceiling mounting: Ensure there is a minimum distance of 200mm between the heater and any walls.

Wall mounting: When mounting the strip heater on a wall, ensure that there is a minimum distance of at least 2200mm from the floor and 200mm from both the ceiling and adjacent walls.

• Determine the mounting location of the heater.
• Using wall brackets as a template, mark the location of the 4 holes for the expansion bolts.

Note: Ensure the distance between the brackets matches distance between heater.

Mounting the Heater

Additional Mounting Options

Dual Ceiling Mounting
Two heaters can be mounted together from the ceiling using a dual mounting bracket (not supplied).

Suspension Mounting
If you have high ceilings, the heater can be mounted lower using a suspension mounting kit (not supplied).

CONNECT TO SMARTERHOME APP

Install App

To register:

• If you already have a Smarter Home
• The system will automatically recognise your country.
• If needed, you can manually select your country from the drop-down box.
• Enter your email address and tap Get Verification Code to continue.
• A 6-digit code will be sent to the submitted email address.
• Enter this code before the one-minute timer expires.
• Continue to the next page and complete your Smarter Home profile.

Set device in pairing mode

• When the device is first turned on, it may automatically enter pairing mode (Wi-Fi indicator will be flashing rapidly).
• If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing the switch button, high/low button and up button in sequence.

Add device through network

• Once registered, tap Add Device, or the +right corner, to add a new device through the network.
• Select the product type from the list of options in the app (Heating & Cooling > Heaters).
• Enter your Wi-Fi details. It is important that your SmarterHome device and the app are connected to the same Wi-Fi network during setup.

• Ensure that the device is in pairing mode, with the Wi-Fi indicator flashing rapidly, Next
• The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome device are kept close until connection is complete.
• After successfully being added, you will have the option to rename the device and listing to enter its control page.

GOOGLE HOME CONTROL

Adding Smartphone To The Google Home App

AMAZON ALEXA CONTROL

OPERATION

Turning the Heater On/Off

• Connect the power cord to an electrical outlet and place the power switch on the heater in the ON position. The heater is now in standby.
• Press the power button on the remote to turn on the heater. The ambient temperature will be displayed. If the ambient temperature is lower than the preset temperature (2-3°C), the heater will automatically turn on and begin heating the room.
• Press the Power button on the remote to return the heater to standby.
• Place the Power switch in the off position to turn it off completely.

Child Lock

• Press the and the power buttons simultaneously to enable the child lock. The ” ” indicator will illuminate.
• When enable, all button inputs will be invalid
• To disable the child lock, press the and the power buttons simultaneously again.

Display

• Press the button on the remote to toggle the display on/off.
• High/Low Power Mode Selection
• Press the button on the remote to toggle between high and low power modes.

Temperature Setting

• Press the set button first to enter the temperature setting mode. Use the up and down buttons to select the desired temperature (5-45°C).|
• The selected temperature will be set when there is no input for 5 seconds.

Timer Setting

• With a timer set, the heater will turn off automatically once the set time has been reached.
• Press the set button twice to enter the timer setting mode. Use the up and down buttons to select the desired timer (1-24 hours)
• The current timer setting will be accepted when there is no input for 5 seconds.

Window Detection

• If the temperature decreases by 3°C or more within 2 minutes, the Window Detection feature will be enabled and the heater will stop heating. The temperature indicator will flash.
• To restore normal operation, use the power button to turn the heater off, then turn it on again after a few seconds.

Wi-Fi Reset

• During operation, press the button, button and button in sequence.
• Wi-Fi will now be reset, and the Wi-Fi indicator will be begin flashing rapidly.
• Connect the heater to the Kogan Smarter Home™ app following the steps from the “Connect To Smarter Home”™ App” section of this user guide.

Temperature Unit
During operation, press the button, button and button in sequence to swap between Celsius and Fahrenheit.

PDF

Kogan KASHOHT20YA OUTDOOR RADIANT STRIP HEATER User Guide

FAQS