Log Home Resource Center M-1 Advanced Mildew Treatment User Guide

Log Home Resource Center M-1 Advanced Mildew Treatment

Introduction

A professional-grade, EPA-registered treatment, the Log Home Resource Center M-1 Advanced Mildew Treatment is designed to eradicate and stop the formation of mildew, mold, and algae on log homes, wood siding, and other porous surfaces. Its oxygen-activated formulation creates a barrier that keeps new infestations at bay while penetrating deeply into wood fibers to destroy current growth at the root. Perfect for restoration experts and homeowners looking for a non-bleach, non-caustic substitute for harsh chemical cleansers.

Specification

• Fungicide/mildewcide based on oxygen
• Yes (look for the number on the label).
• 150–300 square feet per gallon of coverage, depending on the porosity of the wood
•  Concentrate or ready-to-use, depending on the recipe
• Hydrogen peroxide and unique surfactants are the active ingredients.
• Clear (wood won’t get discolored or stained)
• Shelf life (unopened, in dry, cool conditions):2+ years

Features

• This treatment reaches embedded mildew spores beneath the surface
• It is oxygen-activated and does not contain chlorine bleach, which is safer for wood integrity
• It has a preventive effect that inhibits regrowth for 6 to 12 months; it is safe for plants and pets
• When dry, it is less toxic than copper-based treatments
• It can be used on a variety of surfaces, including logs, decks, fences, shingles, and masonry.

Precautionary Statement

HAZARDS TO HUMANS

Harmful if inhaled. Avoid breathing vapors or spray mist. Causes moderate eye irritation. Causes skin imitation. Harmful if swallowed or absorbed through skin. Avoid contact with eyes, skin or dothing. Wear goggles or face shield.

SAFETY

USER SAFETY RECOMMENDATIONS

Users should: Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. Remove dothing immediately if the pesticide gets inside. Then wash thoroughly and put on Dean clothing.

FIRST AID

• IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice.
• IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth, if possible. Call a poison control center or doctor for further treatment advice.
• IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment advice.
• IF SWALLOWED: Immediately call a poison control center or doctor. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give any liquid to the person. Do not give anything by mouth to an unconscious person. Have the product container or label with you when calling a poison control center or doctor, or going for treatment.
• NOTE TO PHYSICIAN: Probable mucosal damage may contraindicate the use of gastric lavage. Contains petroleum distillate – vomiting may cause aspiration pneumonia.

IN CASE OF EMERGENCY

• CALL 800-424-9300

PHYSICAL AND CHEMICAL HAZARDS INFORMATION:

• Do not use or store near heat or open flame.

Direction For Use

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. MIXERS AND HANDLERS: Read precautionary statements prior to handling the product. Add M-1 Advanced Mildew Treatment as directed below to the coating for maximum protection against mold, mildew. Mix thoroughly, stirring M-1 Advanced Mildew Treatment into the coating for 2-3 minutes. To ensure best coverage and results, follow coating manufacturer’s instructions for cleaning and preparing the surface. M-1 Advanced Mildew Treatment is for protecting the applied film and paint, not the substrate.

• Do not apply this product in a way that will contact any person or pet.
• Pour contents of container into 5 gallons of paint or other coating.
• Shake or stir thoroughly for 2-3 minutes.

ENVIRONMENTAL HAZARDS:

This product is toxic to fish. Do not discharge effluent containing this product into lakes, streams, ponds, estuaries, oceans or other waters unless in accordance with the requirements of a National Pollutant Discharge Elimination System (NPDES) permit and the permitting authority has been notified in writing prior to discharge. Do not discharge effluent containing this product to sewer systems without previously notifying the local sewage treatment plant authority. For guidance contact your State Water Board or Regional office of the EPA.

Storage And Disposal

Do not contaminate water, food, or feed by storage or disposal. PESTICIDE STORAGE: Do not store at low or extreme temperatures.

PESTICIDE DISPOSAL: If empty: Do not reuse this container. Place in trash and offer for recycling if available. If partly filled: Call your local solid waste agency for disposal instructions. Never place unused product down any indoor or outdoor drain.

CONTAINER DISPOSAL: Non-refillable container: Do not reuse or refill this container. Triple rinse (or equivalent). Then offer for recycling or reconditioning if available, or puncture and dispose of in a sanitary landfill, or incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke.

Troubleshooting

• Managing:
  • When applying, put on a mask, gloves, and goggles.
  • Avoid touching your eyes or skin, and if you do, rinse right away.
  • Avoid combining with other substances, particularly acids or ammonia.
• Environmental Information:
  • Avoid streams since they could endanger aquatic life.
  • Before being exposed to rain, let it completely dry (4–6 hours).
• Storage:
  • Keep out of direct heat and flames in the original container.
  • Keep out of children’s and pets’ reach.

PDF

Log Home Resource Center M-1 Advanced Mildews Treatment User Guide

FAQs