Sandberg 420-31 10000 USB-C + QC 3.0 Power bank Quick Guide

Sandberg 420-31 10000 USB-C + QC 3.0 Power bank

Introduction

The Sandberg 420-31 10000 USB-C + QC 3.0 Power Bank is a high-capacity, portable charger made to keep your gadgets charged while you’re out and about. This power bank can swiftly and effectively charge your smartphones, tablets, and other devices thanks to its 10,000mAh capacity and support for USB-C and Quick Charge 3.0 (QC 3.0). It is small, light, and a necessary tool for anyone who requires dependable portable power for vacation or daily use.

What Is In The Box

• Power Bank
• User Manual
• Charger

Specification

• Battery Capacity: 10,000mAh
• Input Ports:
  • USB-C Input: 5V/3A, 9V/2A, 12V/1.5A
  • Micro-USB Input: 5V/2A
• Output Ports:
  • USB-A Output (1): 5V/3A (QC 3.0)
  • USB-A Output (2): 5V/2.4A
  • USB-C Output: 5V/3A
• Dimensions: 146mm x 71mm x 15mm
• Weight: 210g
• Battery Type: Lithium-ion
• Charging Time: Approximately 4-5 hours for a full recharge (depending on input method)
• LED Indicators: 4 LED lights show the current charge level (0-25%, 26-50%, 51-75%, 76-100%)

Features

• USB-C Input/Output: The power bank is incredibly adaptable and future-proof because it has a USB-C port that can be used to power your devices as well as charge the bank.
• Quick Charge 3.0 (QC 3.0): This technology shortens the time it takes for a device to fully charge by enabling faster charging rates for compatible devices.
• Dual Output Ports: The two accessible USB output ports allow you to charge two devices at once.
• LED Indicators: Integrated LED indicators help you keep an eye on the battery’s condition by displaying the power bank’s current charge level.
• Compact and Portable: Perfect for daily use and travel, its slim and light form makes it simple to fit in a pocket or bag.
• Smart Charging Technology: Ensures the quickest and most effective charging by automatically determining the ideal charging speed for each connected device.
• Protection Against Overcharge and Overcurrent: The power bank has built-in safeguards against damage to both the power bank and other devices.

Safety Information

• Avoid Overcharging: To avoid damage or overheating, do not leave the power bank plugged in for extended periods of time after it has been fully charged.
• Keep Dry: To avoid internal damage, keep the power bank dry and away from moisture or water.
• Keep in a Cool, Dry Place: Keep the power bank somewhere cool and dry. To prolong its battery life, keep it out of extremely hot or cold environments (below 0°C or above 45°C).
• Use with Compliant Devices: Make sure the gadgets you attach to the power bank don’t use more power than is necessary and are compatible with the charging output.
• Do Not Disassemble: Neither disassembling nor altering the power bank is advised. The warranty may be voided and safety issues may arise if the item is opened.
• Use the Included Cable: Always use the certified cables that meet the input/output standards or the cables that are provided for the best performance and safety.

Charge Power bank

Charge devices

Troubleshooting

• Possible Reasons Why the Power Bank Won’t Turn On:
  
  • The battery is totally dead. faulty adapter or charging cable. Protection of the internal circuit was activated.
  • First, charge it: Before attempting to switch it on, connect it via USB-C to a QC 3.0-compatible charger (9V/2A or above is advised) for at least half an hour.
• Try a different adaptor or cable:
  
  • Make use of a 5V/3A or 9V/2A charger and a high-quality USB-C cable.
• Reset the power bank:
  
  • Some models offer a reset feature that requires you to plug it in and out several times or push the power button for ten or more seconds.
• Possible Reasons for Power Banks Not Charging Devices:
  
  • low battery, which results in a weak output. QC 3.0 is incompatible with the device. bad port or cable.
  • Verify the power bank’s battery level; the remaining charge should be indicated by LED indicators.
• Switch to a different port or cable:
  
  • Try the USB-C and USB-A (QC 3.0) ports.
• Possible Reasons for Slow Charging (Not Fast Charging):
  
  • QC 3.0 is not supported by the device. use a charger/cable that is not QC 3.0.
  • The battery of the power bank is low.  
• Check device compatibility:
  
  • Only devices that support QC 3.0 will be able to fast charge.
  • Make use of a QC 3.0-certified cable and adapter (check the cable for markings).
• Possible Reasons Why a Power Bank Turns Off While in Use:
  • protection against overheating or overburden.
  • The connected gadget (such as a laptop) consumes excessive amounts of power.
  • If it feels hot to the touch, let it cool.
  • High-power devices should be disconnected (e.g., switch to a phone instead of a laptop).
  • Examine the charging cable for any shorts.
• Incorrect or Non-Working LED Indicators: 
  • problem with the battery level sensor.
  • Recharge the power bank completely (let it charge for at least four hours).
  • Press the power button for more than 15 seconds to reset it.

Warranty

There is a five-year warranty on your Sandberg product. Please read the warranty terms and register your new Sandberg product at www.sandberg.it/warranty.

PDF

Sandberg 420-31 10000 USB-C + QC 3.0 Power bank Quick guide

Related Posts

1. Sandberg 450-09 Bluetooth Buddy Quick guide
2. Sandberg 134-12 Streamer USB Webcam Pro Quick guide
3. Sandberg 630-95 Wireless Keyboard Set Pro User Guide

FAQs