Sound Core Infinite A3371 Wireless Sound bar Speaker User Manual

Sound Core Infinite A3371 Wireless Sound bar Speaker 

Introduction

Anker created the small and potent SoundCore  Infinite A3371 wireless sound bar to improve the sound quality of your house. With its clean highs and strong bass, this sound bar produces immersive sound whether you’re gaming, watching movies, or listening to music. The Infinite A3371 is ideal for improving the audio setup on your computer or TV because of its capabilities, which include Bluetooth connectivity, several audio modes, and a stylish design.

In The Box

Specifications

• Input: 100-240V~ 50/60Hz 0.5A
• Audio output: 100 W
• Size: 880 x 56 x 90 mm / 34.6 x 2.2 x 3.5 in
• Weight (without packaging): 2.9 kg / 104 oz.
• Bluetooth version: V4.2
• Range: 10 m / 33 ft.

At a Glance

Safety Instruction

• Avoid dropping.
• Do not disassemble.
• Do not submerge in water.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not use any corrosive cleaner / oil to clean.
• The product should not be exposed to dripping or splashing water.

Key Features

• Immersion Sound Quality: Two passive radiators and two full-range speakers produce well-balanced sound with distinct highs and deep bass.
• Multiple Audio Modes: To maximize sound for various kinds of content, select one of three audio modes (Movie, Music, Dialogue).
• Long Battery Life: One charge can last up to 20 hours of continuous playback. Perfect for prolonged use that doesn’t require frequent charging.
• Bluetooth 5.0: Offers a quick, dependable connection with low latency.
• Compact and Stylish Design: This sleek, contemporary design blends in perfectly with any type of home décor. portable and lightweight for adaptable positioning.
• Versatile Connectivity: For a range of audio sources, connect via USB, AUX, or Bluetooth. Use the USB port to update the firmware on your sound bar.
• Simple Controls: The sound bar has easy-to-use buttons for volume, power, and mode selection. For easy changes, a remote control is included.
• Wall-Mountable: A wall-mounting kit is included for convenient installation and space-saving positioning.

Troubleshooting

• If the sound bar isn’t turning on, make sure it’s charged. After plugging it in, give it a few minutes before attempting again.
• Bluetooth connection problems can be fixed by turning off and then turning back on Bluetooth on the sound bar and the associated device.
• Check for any obstacles between the sound bar and the connected device if the sound quality is poor.
• Make sure the power adapter and USB-C cable are operating correctly.
• if the remote control isn’t working, make sure the batteries are new. Directly aim the remote control at the infrared sensor on the sound bar.

Status indicator

• Power button
• Volume-down control
• Volume-up control
• Source input button
• Wall mounting screw holes
• Power input
• Service port
• Aux input
• Optical input
• Coaxial

Placement

Table Placement

• Place the sound bar on a solid surface.

Wall mount Installation  

• Step 1: Insert two wall mounting screws into the wall mounting screw holes, then fasten the screws.

• Step 2: Place the wall mounting template against the wall, under your TV. Mark the 4 bracket holes on the wall with a pencil.

• Step 3: Fix the two mounting brackets on the wall according to the center points. Use bolts (not included) to secure the brackets.

• Step 4: Hang the sound bar on the brackets.

Remote Control

• Battery installation

• Remote control buttons

Using Your Sound bar

Turn On / Off

Connect to your TV

• You can use optical cable, coaxial cable or 3.5mm to RCA audio cable to connect to the respective output port of your TV.
• Press the source input button on the sound bar or remote control to activate the corresponding mode.
• The status indicator will be solid green in optical mode, orange in coaxial mode and cyan in Aux mode.

Note:

• The status indicator light will stay on for 10 seconds.
• Not all TVs have the audio outputs shown as above, please check your TV’s specifications before setup.
• Try set the TV output to PCM if there is no audio sound when using either of the optical or coaxial inputs.
• Coaxial cable is not included

Connect to other devices

• You can use optical cable / coaxial cable or 3.5mm to RCA audio cable, or 3.5mm to 3.5mm cable (not included) to connect to the respective output port of other devices (such as Blu-ray player, game console, tablet, MP3 Player / laptop etc.
• Press the source input button on the sound bar or remote control to activate optical, coaxial or Aux mode. The status indicator will be solid green in optical mode, orange in coaxial mode and cyan in Aux mode.

Note:

• The status indicator light will stay on for 10 seconds.
• Follow your device’s user manual if you want to connect the sound bar to your other devices (such as Blu-ray player, game console, tablet, MP3 Player / laptop…etc)..
• 3.5mm to 3.5mm cable is not included.

Bluetooth mode

• Press power button on the remote control to switch on the sound bar.
• Press the Bluetooth button on the remote control to activate Bluetooth pairing mode.
• Turn on the Bluetooth of your device, search for Sound core Infinite on your Bluetooth list then select connect

Declaration of Conformity
Hereby, Anker Innovations Limited declares that the radio equipment type A3371 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com/products

• Maximum output power: 0dBm
• Frequency band: 2.4G band (2.4000GHz-2.4835GHz)

Anker Innovations Limited / Room 1318-19, Hollywood Plaza, 610 Nathan Road, Songkok, Kowloon, Hong Kong

PDF

Sound Core Infinite A3371 Wireless Sound bar Speaker user manual

Related Posts

1. SoundCore Motion Plus Portable Wireless Speaker User Manual
2. SoundCore Mini 2 A3107 Wireless Speaker User Manual
3. SoundCore BOOST A3145 Wireless Speaker User Manual

FAQs