Acoustics Research AWS5 Wireless Indoor-Outdoor Speaker Installation Manual

Acoustics Research AWS5 Wireless Indoor-Outdoor Speaker 

Introduction

The Acoustic Research Portable Wireless Speaker with 3.5mm jack lets you enjoy your music anywhere, at home or on the go, with two ways to connect to your music. The 900MHz wireless transmitter gives you 150ft* of room to roam from your audio source, great for outdoor entertaining at home, with crystal-clear wireless audio. The speaker’s 3.5mm jack offers a convenient connection option to use anywhere you go—just connect your MP3 player or smartphone to the speaker, and enjoy!
This manual covers various connection options and detailed operating instructions for making the AR Wireless Speaker System a valued part of your lifestyle. If, after having reviewed the instructions, you have any questions, please call toll-free 1-800-732-6866 or visit www.acoustic-research.com. *Range may vary according to environment.

Important Information

•  Read these instructions.
•  Keep these instructions.
•  Heed all warnings.
•  Follow all instructions.
•  Clean only with dry cloth.
•  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.                                   
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
•  Unplug this apparatus during lightning storms or when unused for long periods of time.
•  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Care and Maintenance

• Always use a soft cloth to clean the speaker and transmitter. Never use any product containing alcohol or other solvents as they may damage the surface.
• Use caution when plugging the power transformers in an AC outlet to avoid the risk of electric shock.
• If the speaker are used outside on a deck or patio, make sure you take them indoors in the event of a rainstorm to prevent possible damage.
• Do not operate or store the system in extreme temperatures (below 32ºF/0ºC and above 122ºF/50ºC).

Product Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product.

Tour of the Speaker

Speaker

Front Panel
POWER/LINKED indicator (not shown) blinks when the speaker is fi rst powered on; it turns solid blue when the speaker is tuned to the transmitter

Rear Panel
Bass Boost button turns the speaker’s bass enhancement on and off

• Power button turns the speaker on and off
• Auto Scan button rescans for the transmitter’s signal
• Volume +/– buttons adjust the volume level

Bottom Panel

• L/M/R switch determines if the speaker plays sound in mono as a stand-alone speaker, or plays the left or right track in a stereo pair with an additional AWS5
• DC IN receives the small round end of one of the included 9V 1200mA AC power adapters; remove the protective cover to insert the adapter
• Battery Compartment Cover (not shown) remove to install 6 AA batteries

Transmitter

• SIGNAL indicator lights green when the audio is present and the transmitter is broadcasting
• POWER indicator lights when the transmitter is on
• CHANNEL 1 2 3 lets you fi nd the best transmission frequency for your environment
• DC IN jack receives the small round end of the included 12V 200mA AC power adapter
• AUDIO IN (R / L) connects to your sound source using one of the connection options shown here

900MHz Wireless Transmitter

• SIGNAL indicator lights green when the audio is present and the transmitter is broadcasting.
• POWER indicator lights when the transmitter is on.
• CHANNEL 1 2 3 lets you fi nd the best transmission frequency for your environment.
• DC IN jack receives the small round end of the included 12V 200mA AC power adapter.
• AUDIO IN (R / L) connects to your sound source using one of the connection options shown here.

Included Accessories

Connecting the Speaker System

Powering the Transmitter

Connect the small, round plug from the transmitter AC power adapter to the transmitter’s DC IN jack. Plug the other end of the transmitter AC power adapter into any standard 120V AC wall outlet.

Note: Be sure to use the speaker AC power adapter rated 12V DC 200 mA (it has the smaller diameter plug).

Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged in and powered at all times. If you will not be using the AWS73 for an extended period of time, unplug the transmitter AC power adapter.

Connecting to an Audio Source

Connecting to an MP3 player, CD player, or computer

• Plug the stereo plugs on the provided Y-adapter audio cable into the AUDIO IN jacks on the back of the transmitter (make sure to match the colors on the plugs and jacks).
• Plug the mini-plug end of the provided Y-adapter into the headphone output of your MP3 player or CD player (or audio output jack on your computer).

Warning: This product is designed to work with line level outputs or headphone outputs only. DO NOT connect it directly to speaker outputs as it will permanently damage the transmitter.

Connecting to an A/V Receiver

• Plug the stereo plugs on the provided Y-adapter audio cable into the AUDIO IN jacks on the back of the transmitter (make sure to match the colors on the plugs and jacks).
• Plug the mini-plug end of the provided Y-adapter into a mini-jack to RCA adapter (not included).
• Connect the stereo plugs on the mini-jack to RCA adapter to the corresponding left and right audio outputs of your A/V receiver, amp, or other audio source.

Powering the Speaker

There are two options to power your wireless speaker: using the included AC power adapter or using 6 AA batteries (not included).

AC Power Adapter

•    Insert the small, round plug from the speaker AC power adapter into the DC IN jack on the bottom panel of the speaker.
•    Plug the other end of the speaker AC power adapter into any standard 120V AC wall outlet.

 Notes:

• Be sure to use the speaker AC power adapter rated 10V DC 1500 mA. The power unit should be plugged in so that it stays vertical or lies flat Streaming Audio With Bluetooth

AA Batteries

• Remove the battery compartment cover on the bottom of the speaker.
• Insert six (6) AA batteries (not included) into the speaker following the polarity (”+” and “-”) as diagrammed inside the battery compartment.
• Replace the battery compartment cover on the bottom of the speaker.

Note:

• Place the rubber cap in the speaker power input jack when using batteries.
• DO NOT mix batteries with different chemistry types (for example, a zinc battery with an alkaline battery).
• DO NOT mix new and used batteries.
• DO NOT leave batteries installed in the product when not in use for long periods.
• Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with local and national regulations.

Pairing the Speaker System

Adjusting the Transmitter

• Turn on your audio source (for example, A/V receiver, MP3 player, stereo, etc.) and play music at a normal listening volume.
• Set the channel select switch on the back of the transmitter to one of the transmitter’s three broadcast frequencies: 1, 2 or 3. If you experience poor reception or interference, try choosing a different frequency by moving the channel select switch to another position.
• When the transmitter is receiving an audio signal and is ready, the SIGNAL indicator turns solid green.

Tuning the Speaker

• Press the Power button on the back of the speaker to turn it on. The indicator light on the front of the speaker blinks while the speaker is tuning to the transmitter. The indicator light turns solid blue when the speaker is tuned to the transmitter—you should hear sound coming from the speaker now.

Note: If the speaker is not tuned or if the transmitter is not connected properly, the indicator light will continue blinking. If this occurs, please see the troubleshooting section of this manual.

• Adjust the volume on the speaker as desired.
• Set up the speaker for mono or stereo operation using the switch on the bottom of the AWS5 speaker.
• Monaural operation: The monaural mode (mono) is recommended when using a single AWS5 by itself. For monaural operation, set the L/M/R switch to “M” on each speaker.
• Stereo operation: You need an additional AWS5 speaker for the stereo option. Set the L/M/R switch to “L” on the speaker located to the left from the listener, and set the other speaker to the “R” position.

Notes:

• The speaker automatically retunes if it loses the transmitter’s signal.
• You can also press the Auto Scan button on the back of the speaker to retune the speaker at any time.
• The transmitter turns off automatically if there is no audio signal present for a prolonged period.
• Interference in the form of static and/or distortion can sometimes be heard.
• If this occurs, confirm the transmitter/speaker adjustments and indicators.
• If the problem persists, refer to the Troubleshooting section of this manual.

Turning the Speaker Off

• Press Power button on the back of the speaker to turn the speaker off.
• Confirm that the speaker is off by verifying that the indicator light on the speaker’s front panel is no longer illuminated.

More Helpful Information

About Fixed-Level Audio Outputs
A fixed-level, or line-level, audio output is considered ideal since it provides an audio signal unchanged by adjustments to the audio source volume control.

Hint: Fixed-level audio outputs from stereo receivers/amps will typically be designated as Tape (or Record) outputs or DVR/DVD-R audio output connections.

Fixed-level outputs from TVs are usually marked as ‘Constant,’ ‘Fixed,’ or ‘Select.’ If they are not marked as such, they are probably variable outputs (see “About Variable-Level Audio Outputs” on the next page). Outputs from DVD players are almost always fixed.

Hint: When connecting to the audio outputs of a DVD player, remember that the DVD player must be showing a TV channel for sound to be produced.

About Variable-Level Audio Outputs:
A variable-level output, such as a headphone jack or certain RCA-type outputs, provides an audio signal that changes with the volume level set on the audio source. As the volume of the audio source is adjusted up and down, so is the audio signal strength sent to the transmitter. This can affect the quality of sound generated by the speaker, and may require an adjustment of the volume level of the audio source to produce a signal strong enough for the transmitter.

Hint: On most bookshelf-type or compact stereo systems, inserting a headphone plug into the headphone jack results in automatic cutoff of the regular, or hard-wired speakers.
Hint: Most TVs, regardless of age or price, have variable outputs. If you are unsure which of your TV audio outputs is fi xed, refer to the TV instruction manual. Some TVs have outputs that can switch between variable and fi xed. When given a choice, fi xed is always recommended.

Troubleshooting

The following troubleshooting guide takes you through some of the more common problems associated with the installation and/or operation of a wireless system. If the problem persists, please call toll-free at 1-800-732-6866 or visit www.araccessories.com

Specifications

Transmitter

• Omni-directional 900MHz broadcast
• Effective transmitting range: up to 150 ft. (45m)*
• Phase-locked loop circuitry (PLL)
• 3 selectable broadcast frequencies
• Stereo audio input

Speaker

• Push-button, auto-lock tuning
• 2-way acoustic design:
• 2” tweeter, 3” woofer
• 10 Watt rated internal amplifier
• Omni-directional receiver
• Frequency response: 40Hz – 15kHz
• Left/Mono/Right switch
• Operates using supplied AC adapter or six (6) AA batteries (not included

Warranty

12 Month Limited Warranty

VOXX Accessories Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product along with any accessories included in the original packaging is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below. Do not return this product to the Retailer.
This Warranty is not transferable and does not cover product purchased, serviced or used outside the United States or Canada. The warranty does not extend to the elimination of externally generated static or noise, to costs incurred for the installation, removal or reinstallation of the product.
The warranty does not apply to any product or part thereof which, in the opinion of the company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident or exposure to moisture. This warranty does not apply to damage caused by an AC adapter not provided with the product, or by leaving non-rechargeable batteries in the product while plugged into an AC outlet.

THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.

No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state/province to state/province.

U.S.A.:Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit #3 Door 16, Mississauga Ontario L5T 3A5

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
FCC Regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to operate it.

RF Exposure Warning

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Industry Canada Regulatory Information

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:

•  This device may not cause interference
•  This device must accept any interference, including interference that may cause undesired operation of the device.
•  This class B digital apparatus complies with Canadian ICES-003. IC Radiation Exposure Statement: This equipment complies with

IC radiation exposure limits set forth for an uncontrolled environment.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
VOXX Accessories Corporation is under license. Other trademarks and trade names are those of their respective owners

PDF

Acoustics Research AWS5 Wireless Indoor-Outdoor Speaker Installation manual

FAQs